Icom COMMUNICATIONS RECEIVER IC-R3 - Manual (Page 45)

41
13
OTHER FUNCTIONS
■ Power saver
The power saver function reduces the current drain to con-
serve battery power.
q Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
• Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until “Power Save” or “P SAVE” appears.
• “P SAVE” disappears after 1 sec. and “PS” appears when color
LCD is OFF.
e Push [ ↔ ] or rotate the tuning dial while pushing [FUNC] to
turn the power saver ON (AUTO) or OFF.
r Push [(MODE) SET] to exit set mode.
■ Monitor switch action
The monitor switch can be set as a ‘sticky’ switch. When set to
the sticky condition, each push of [SQL] toggles the monitor
function on and off.
q Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
• Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until “Monitor” or “monI” appears.
• “monI” disappears after 1 sec. and “mo” appears when color LCD
is OFF.
e Push [ ↔ ] or rotate the tuning dial while pushing [FUNC] to
set the monitor switch to sticky (HOLD) or normal (PUSH).
r Push [(MODE) SET] to exit set mode.
‘Sticky’ action Monitor switch
function set mode ‘Normal’ action
Power Save : AUTO
Monitor : PUSH
Dial Speedup: ON
Key Lock : NORMAL
Display : AUTO
Power Save : AUTO
Monitor : HOLD
Dial Speedup: ON
Key Lock : NORMAL
Display : AUTO
Power Save : AUTO
Monitor : PUSH
Dial Speedup: ON
Key Lock : NORMAL
Display : AUTO
Power saver ON
(AUTO) Power save set
mode Power saver OFF
Power Save : AUTO
Monitor : PUSH
Dial Speedup: ON
Key Lock : NORMAL
Display : AUTO
Dial Speedup: ON
Key Lock : NORMAL
Display : AUTO Dial Speedup: ON
Key Lock : NORMAL
Display : AUTO
Power Save : AUTO
Monitor : PUSH
Power Save : OFF
Monitor : PUSH