I.R.I.S. DC1100 - Manual (Page 41)

Coaxial Networks, Inc. Page 41 of 60
Loads the RF Attenuator with desired value.
Upcon RAS
Sets high and low values for RF ALC.
Upcon RAD
Disable RF ALC.
Upcon RAE
Enable RF ALC. This is the default setting.
Upcon RLS
Sets the RF power limit.
Upcon RPS
Sets the RF Power.
Upcon RTD
Disable the RF Threshold.
Upcon RTE
Enable the RF Threshold.
Upcon RTS
Sets the desired value for the RF Threshold.
Upcon SC
Displays the current operating parameters for the upconverter.
Upcon SP
Displaces the IF and RF power coming to and from the upconverter module.