Intermec Mobile PB3 User Manual
Page 34
24
PB3 Mobile Printer User’s Guide
11
Select
Control > Macro.
12
Browse to the location of the
ConfigurationHardwareInformationTTMacro.ttl file.
13
Select and open the file.
14
In the
Enter Printer MODEL Number field, enter the printer
model number from the configuration test page, and click
OK.
15
In the
Enter Printer SERIAL Number field, enter the printer
serial number from the configuration test page, and click
OK.
16
In the
Enter Wireless DEVICE Address field, enter the wireless
device address from the configuration test page, and click
OK.
When the hardware configuration process is done, the Flash load
message and bootloader message appear.
17
Print a configuration test page. For help, see
Configuration Test Page” on page 11.
18
Make sure that the Model Number, Serial Number, and Device
Address on the test page you printed in Step 17 matches the
information on the test page you printed in Step 1.