Integra DPC-6.1 - Manual (Page 16)

16
DVD VCD CD
2 8
Play
Last
Fast forward
Fast reverse
Motion
Slow-
30
1 2 3
5 6
7 8 9
+10 0
4
PAUSE/STEP
FR
PLAY
FF
OPEN/CLOSE
STOP
/ / / ,
ENTER
REMOTE CONTROLLER RC - 426DV
FR
FF
DVD VCD
FR
FF
Playing back Discs
(continued)
Direct Playback, Stop and Pause
■ Direct Playback via the On-Screen Menu
1. Switch on your TV set.
2. Select the desired title using the /
/ / or the number buttons.
3. Press the ENTER button.
The DVD Changer starts playing back the selected title.
• If you do not need the menu functionality of PBC-
encoded Video CDs, set the “PBC” function to “Off”.
See page 38.
■ Pausing Playback: Still mode
1. To pause playback, press the PAUSE/STEP button.
• The sound is muted during still mode.
2. Press the PLAY button to r esume playback.
Note:
The DPC-6.1 also provides a function for optimum display of still pic-
tures (only available for DVD videos). See “Pause/Still” on page 37.
■ Stopping Playback
Press the STOP button.
If you do not wish to resume playback from this position,
see “Resuming Playback from the Beginning of the Cur-
rent Title” on page 17.
■ Removing a Disc
1. Stop playback.
2. Press the OPEN/CLOSE button.
3. Wait until the disc drawer has opened completely,
then remove the disc.
Notes:
• Do not move the DPC-6.1 during playback or subject it to
strong vibrations to avoid damaging the discs.
• Use the OPEN/CLOSE button on the remote controller or
DVD player to open and close the disc drawer. Do not
obstruct the disc drawer while it is moving. Doing so may
cause the DVD Changer to malfunction.
• Do not push up the disc drawer or put objects other than discs
on it. Doing so may cause the DVD Changer to malfunction.
• In many instances, a menu screen will appear after playback of
a movie is completed. Prolonged display of such a menu may
damage your television set, permanently etching that image
onto the screen. To avoid this, press the STOP button on your
remote controller once playback of the movie is finished.
• If you pause a picture and leave it still for a long time, the
scr een saver of the DPC-6.1 is automatically activated
(provided the “Screen Saver” function is set to “On”, see
page 37). To deactivate the screen saver and resume
playback, press the
PLAY button.
You can play back discs at various speeds, and resume playback in various
ways. Use the remote contr oller for the following functions.
Fast Reverse and Fast Forward Playback
Press the FR (fast reverse) or FF (fast
forward) button during playback.
• DVD videos
The playback speed changes to twice the
normal speed in the selected direction.
Press the button again to further increase
the fast forward or reverse speed.
FR: press this button to quickly r eturn to
an earlier position.
FF: press this button to advance to a
position behind the current posi-
tion.
2 8 30
TV screen
X2 the normal
speed X8 the normal
speed X30 the normal
speed
The direction of the arrow varies
depending on the button you press.
• VIDEO CDs/Audio CDs
For Video and Audio CDs, there are
two fast forward and reverse speeds.
FR1 FR2
FF1 FF2
TV screen
Fast reverse
playback
Fast forward
playback
■ Resuming Normal Playback after Fast Forward-
ing/Reversing
After locating the desired position,
press the
PLAY button to r esume
normal playback.
• The DVD Changer does not play back sound or
subtitles during fast reverse or forward scans of DVD
videos. The sound of audio CDs, however, is played
back at the selected scrolling speed.
• The x2, x8 and x30 speeds ar e only approximate
values. They may vary slightly fr om disc to disc.
ENTER
PLAY