Infinite Peripherals ScanPro BlackBerry - Manual (Page 6)

.
.
.
.
.
.
.
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc. Page 5
www.ipcprint.com
ScanPro BlackBerry OS User’s Manual v2.01
Installing & Replacing Batteries
Use only Alkaline batteries in your scanner. Be sure to remove the batteries from
the scanner when storing the scanner for more than 30 days.
Installation Steps:
1. Turn the scanner over so that the back faces
up.
2. Remove the battery cover by pressing the
button at the top of the cover, and moving
the cover down.
3. If there are batteries in the scanner, remove
them.
4. Insert the new batteries so that the positive
end (+) is up on the outside batteries, and
down on the middle battery.
5. Replace the battery cover by inserting the
tabs at the top of the cover into the slots in
the back of the scanner. Slide the cover up.
Figure 2