ILY Enterprise CoolCopy 7 - Manual (Page 8)

Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
8
When the system has a hard drive connected, the hard drive must connect on IDE 0 port with
“Master” setting and the CD-ROM must set at “Slave.”
Hardware Connection without Hard Drive for Coolcopy7
Coolcopy 7
IDE 4 CD-RW
IDE 3 CD-RW
IDE 2 CD-RW
IDE 1 CD-Rom
IDE 8 CD-RW
IDE 7 CD-RW
IDE 6 CD-RW
IDE 5 CD-RW
Pow er