ILY Enterprise CoolCopy 7 - Manual (Page 25)

Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
25
4.11.15 Quick Erase
This function will quickly erase the data on the disc.
Press ENT button to enter the Quick Erase
and ESC to exit.
Use arrow button to confirm whether you want to erase
the data. Select the “Yes” or “No” setting. Then press
ENT or press ESC to return to 11-15 menu.
LCD will show the information as follows:
When erasing disc function is finished, the LCD will
display as follows:
4.11.16 Full Erase
This function is to completely erase the data on the CD rewriteable discs.
Press ENT to enter the Full Erase.
Use arrow button to select “Yes” or “No.”
Then press ENT or ESC to return to 11-16 menu.
LCD will show the information as follows:
When finished, the LCD will show the message the
following message:
4.12 Adv Setup
This function allows you to change the system configuration. Changes should be made only when
you are fully familiar with the function. To enter the function, please press “ESC” button for 2
seconds .
4.12.1 UnderRun Protect
This function lets you control Buffer Under Run Protection settings, such as Burn Proof,
SafeBurn, JustLink, Seamless Link, etc.
Press ENT button to enter “UnderRun Protect.
11-15. Setup
Quick Erase
All data will be
lost, erase? Yes
Erasing disc
00:24 (Quick)
Quick Erase
OK:01 Fail:00
11-16. Setup
Full Erase
All data will be
lost, erase? Yes
Erasing disc
03:24 (Full)
Full Erase
OK:01 Fail:00
12-01. Adv Setup
UnderRun Protect