ILY Enterprise CoolCopy 7 - Manual (Page 6)

Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
6
Hardware Connection with Hard Drive for Coolcopy3
When the system connects with the hard drive, the hard drive must connect on the IDE 0 port
with the “Master” setting and the CD-ROM must set at “Slave”.
Hardware Connection without Hard Drive for Coolcopy3
Coolcopy 3
IDE 0 CD-Rom/HDD
Pow er
IDE 3 CD-RW
IDE 2 CD-RW
IDE 1 CD-RW
Coolcopy 3
IDE 3 CD-RW
IDE 2 CD-RW
IDE 1 CD-RW
IDE 0 CD-Rom
Pow er