iSimple PGHNI2 - Manual (Page 26)

24
Store Presets
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.
Please Note: If you are using the Media Gateway to add Sirius but
still have factory XM installed, it is important to keep the presets in
seperate banks.
Recall Presets
Press the preset button that corresponds with the channel you want to recall.
Changing Display
Press the “DISP” button to display artist and track information.
Selecting AUX Input
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK ▲” button to scroll through the available sources. Once
“AUX” is displayed, press the “TUNE ▼” button to select it.
Selecting Factory Installed Satellite
Radio (If equipped)
Entering Mode Select Menu
Press the “RADIO” button a few times until “SAT” is displayed on the screen. Immediately
press the “SEEK ▲” button to scroll through the available sources. Once “SAT” is
displayed, press the “TUNE ▼” button to select it.
12. Versa
Important Configuration Process
To ensure proper functionality of your PXAMG iPod Interface, you must first set the
“SEEK” button to the proper configuration. To do this you must first enter the Mode
Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on the
screen. Immediately press the “SCAN” button until “SEEKREV” is displayed. After 6
seconds the radio will time out and the “SEEK” button is now configured properly.