Hd radio operation important configuration process – iSimple PGHNI2 User Manual

Page 15

HD Radio Operation

Important Configuration Process

To ensure proper functionality of your HD tuner, you must first set the “TUNE” and

“SEEK” buttons to the proper configuration. (Note: You do not have to repeat this

process if you have already done so for iPod control!) To do this you must first enter the

Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on
the screen. Immediately press the “SCAN” button until “TUNEREV” is displayed. After

6 seconds the radio will time out and the “TUNE” button is now configured properly. You

must repeat the same process for the “SEEK” button. To do this you must first enter the

Mode Select Menu. Press the “RADIO” button a few times until “SAT” is displayed on
the screen. Immediately press the “SCAN” button until “SEEKREV” is displayed. After

6 seconds the radio will time out and the “SEEK” button is now configured properly.

Entering Mode Select Menu

Press the “RADIO” button a few times until “SAT” is displayed on the screen. Immediately

press the “SEEK>>” button to scroll through the available sources. Once “HD-FM” is

displayed, press the “<

Tune Up
Press the “TUNE>>” button TWICE to manually tune up.

Seek Up
Press the “SEEK>>” button to seek up to next available station.

Tune Down

Press the “<

Seek Down

Press the “<

Changing Bands
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately press the “SEEK>>” button to scroll through the available sources.

Once the band you would like to select is displayed (“HD-AM” or “HD-FM”), press the

“<

Store Presets
Tune to a station you want to store. Press the “SCAN” button. Press “SEEK>>” to
select the preset location (1-18) where you wish to store the preset. When the preset

location is displayed (for example PRE1) press “<The screen will display “PR SAVED” and your preset has been stored into memory.

Recall Presets
Press the “SCAN” button. Press “SEEK>>” to scroll through the stored preset stations.
When the desired preset is displayed, press the “TUNE>>” button TWICE to select it.