Sirius satellite radio operation – iSimple PGHNI2 User Manual
Page 12
10
Changing Bands
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Immediately turn the rotary TUNE KNOB to scroll through the available sources.
Once the band you would like to select is displayed (“HD-AM” or “HD-FM”), press the
“< Store Presets KNOB to select the preset location (1-18) where you wish to store the preset. When the Recall Presets Press the “SCAN” button. Turn the rotary TUNE KNOB to scroll through the stored preset stations. When the desired preset is displayed, press the “< Exit menus Steering Wheel Controls Press and hold“▲” to tune up or “▼” to tune down. Sirius Satellite Radio Operation Entering Mode Select Menu Immediately turn the rotary TUNE KNOB to scroll through the available sources. Once “SIRIUS” is displayed, press the “< Channel Up Turn the TUNE KNOB clockwise to move up through the channels. Channel Down Turn the TUNE KNOB counter-clockwise to move down through the channels. Category Up Category Down Press the “< Store Presets Please Note: If you are using the Media Gateway to add Sirius but still have factory XM installed, it is important to keep the presets in seperate banks.
Tune to a station you want to store. Press the “SCAN” button. Turn the rotary TUNE
preset location is displayed (for example PRE1) press “SEEK>>” to store it. The screen
will display “PR SAVED” and your preset has been stored into memory.
Press the “SCAN” button to exit the Preset Menu and continue playing the current
station. “EXIT” will be displayed when the button is pressed. You can also wait the
allotted 10 seconds and the menu will exit automatically.
Press the “AM/FM/SAT” button a few times until “SAT” is displayed on the screen.
Press the “SEEK>>” button to move up through the categories.
Tune to the station you wish to store as a preset. Press and hold the preset button on
which you want to store the channel.