IBM EDR1600 User Manual

Page 49

Administrator’s Guide and Operating Instructions

Options to Play – To playback all recorded video images, or to

playback only motion or alarm detected video images of the assigned
location.

Start/End Section No – 32 MB/Section or 32 Slices/Section for the

system. Use the Down arrow button to select the Start/End Section
No.

Start/End Slice No – 1 MB/Slice for the system. Use the Down

arrow button to select the Start/End Slice No.

Start/End Date/Time – The recorded date & time for the Start/End

Block/Section/Slice.

Slider Bar (and the messages above it) – The Slider Bar displays in

different colors the status for the recorded video from the Start
Block/Section/Slice No. through the End Block/Section/Slice No.
The colors are

Blue – Video Loss,
Green – Motion,
Red – Alarm,

The messages above displays Block-Section-Slice in BB-SS-ss
format, date in YYYY/MM/DD format, and military hour in
HH:MM:SS format for the video corresponding to the Slider Bar
position. If Block-Section-Slice is shown as nn-XX-XX, the
messages are at the Block level, nn-nn-XX Section level, and
nn-nn-nn Slice level.

Set Start button – Drag the Slider Bar to the start position you want,

then click on the Set Start button to change the Start
Block/Section/Slice No.

Set End button – Drag the Slider Bar to the end position you want,

then click on the Set End button to change the End
Block/Section/Slice No.

Video Loss Status – Video loss status for the Block-Section-Slice

shown above for Camera 1 through 16 – Y for video loss, N for No
video loss.

Motion Status – Motion status for the Block-Section-Slice shown

above for Camera 1 through 16 – Y for motion, N for No motion.

Alarm Status – Alarm status for the Block-Section-Slice shown

above for Alarm In 1 through 24 – Y for alarm, N for No alarm.