IBM THINKCENTRE 8123 User Manual
Page 18
5.
Remove
the
four
screws
that
secure
the
power
supply
at
the
rear
of
the
chassis.
6.
Press
inward
on
the
metal
retainer
inside
the
chassis
and
slide
the
power
supply
toward
the
front
of
the
chassis
and
lift
it
out
of
the
chassis
as
shown.
7.
Install
the
new
power
supply
into
the
chassis
so
that
the
screw
holes
in
the
power
supply
align
with
those
in
the
chassis.
Note:
Use
only
the
screws
provided
with
the
new
power
supply.
8.
Install
and
tighten
the
four
screws
that
secure
the
power
supply.
10
Hardware
Replacement
Guide
This manual is related to the following products: