Icom COMMUNICATION RECEIVER IC PCR100 - Manual (Page 15)

11
2
PANEL DESCRIPTION
!1
AUTOMATIC NOISE LIMITER INDICATOR [ANL] (p. 21)
Appears when the automatic noise limiter is on.
!2
TONE SQUELCH INDICATOR [T-SQL] (p. 36)
Appears when the tone squelch is on.
!3 AUTOMATIC MODE INDICATOR [AUT-M] (p. 19)
Appears when the automatic mode function is on.
!4 MAXIMUM FREQUENCY SPAN INDICATORS (p. 34)
➥ Indicate the upper and lower observable frequency limits
around a receive frequency.
➥ In the diagram, the upper and lower limits are +100 kHz
and –100 kHz.
!5 FREQUENCY SPAN INDICATION (p. 34)
Indicates the frequency span selected with the [SPAN–] or
[SPAN+] button.
!6 CENTER FREQUENCY INDICATOR (p. 34)
Indicates the center frequency of the frequency span; this
is for the currently received frequency.
!7
SWEEP STEP INDICATOR (p. 34)
Indicates band scope sweep step.
!8
LIMIT INDICATOR (p. 35)
➥ Indicates when the tuning step is greater than the auto-
matic sweep step setting.
➥ In the diagram, the tuning step is greater than the auto-
matic sweep step setting and the tuning step (TS) and
the sweep step width are not the same.