Icom DSC CONTROLLER DS-100 - Manual (Page 9)

2
CALL PROCEDURE
5
NOTE:
• ‘nature of distress’ will be recorded for 10 min. until a distress call
transmits.
• Distress call repeats every 3.5–4.5 min., until receiving an ‘ac-
knowledgement’
• Beep (Pi,Pi) sounds with the max. volume every 1 sec.
• Push [DISTRESS] button to transmit a renewed distress call.
• Push [CLR] to cancel the ‘Call repeat’ mode.
The ‘cancel acknowledgement’ is automatically transmitted
when the [CLR] key is pushed.
■ Entry Position/Time
When no GPS receiver is connected, the ‘Entry
Position/Time’ appears at the top of subject menu.
q Push [CALL], then push [ √ ] to select ‘Entry Position/Time’.
w Push [ENT], then enter the latitude data with key pad.
e Push [ Y ]/[ Z ] to select N; north latitude or S; south latitude,
then push [ENT].
• Push [ Ω ]/[ ≈ ] to move the cur-
sor then push [ Y ]/[ Z ] to correct
the data
• Push [CLR] to Exit the menu.
• Push [A/a], the push [ENT] to
enter a ‘Null data’.
r Enter the longitude data with
key pad.
t Push [ Y ]/[ Z ] to select E;
east longitude or W; west
longitude, then push [ENT].
• Push [ Ω ]/[ ≈ ] to move the cur-
sor then push [ Y ]/[ Z ] to correct
the data
• Push [CLR] to Exit the menu.
• Push [A/a], the push [ENT] to
enter a ‘Null data’.
Latitude
° ’N
Longitude
° ’E
UTC :