Set-up, Select ‘set-up, Address id – Icom DSC CONTROLLER DS-100 User Manual
Page 21
17
4
SET-UP
■
Select ‘Set-up’
The following setting/operations available in ‘Set-up’ menu.
• Address ID
• Offset time
• Brightness
• Contrast
• MMSI check
q
Push [CALL], then push [
√
]
several times to select ‘Set-
up’, then push [ENT].
w
Select ‘Set-up’, then push
[ENT].
• ‘Set-up’ menu appears on
the screen.
e
Push [CLR] to exit the Set-up
menu.
■
Address ID
A total of 70 address ID can be programmed as “Address ID”
(for ships and coast stations) and “Group ID” (for group sta-
tion).
• Add an address ID
q
Push [
∫
]/[
√
] several times to
select ‘Add an address ID’,
then push [ENT].
w
Push numeral keys to input
an address ID code, then
push [ENT].
• When a wrong number is input,
push [CLR], then correct the
number again.
e
Enter the desired name for
the ID code, then push
[ENT].
• Push [A/a] several times to tog-
gle capital letters, small letters
and numerals.
• Push the corresponding key
one or more times to input the desired character.
• Push [BS] to erase the character.
• Push [
Ω
] to reverse the cursor position; [
≈
] ot forward the cursor
position.
r
Push [CLR] to exit the screen.
Individual ACK
Group call
All ships call
Received calls
Distress setting
≈
Set-up
≈
Address ID
Offset time
Brightness
Contrast
MMSI CHECK
≈
Add an address ID
Delete address ID
Add a group ID
Delete a group ID
ID:(9digit)
Name:(15charactors)