Recording, Using the sleep timer – Insignia NS-R2000 User Manual
Page 14
12
Insignia NS-R2000 Stereo Receiver
www.insignia-products.com
Listening to FM stereo broadcasts
To listen to FM stereo broadcasts:
•
While listening to an FM broadcast, press the
FM MODE button.
Recording
Recording on tape
To record on tape:
1 Select the recording input source (this cannot
be TAPE).
2 Start recording on the tape recorder.
3 Start play on your input device.
Recording on AUX
To record on the auxiliary device:
1 Select the recording input source (this cannot
be AUX).
2 Start recording on the auxiliary device.
3 Start play on your input device.
Using the sleep timer
The sleep timer automatically turns the receiver
off after a specified period of time.
To use the sleep timer:
•
Press the SLEEP button to specify the
amount of time you want the receiver to play.
Each time this button is pressed, the time
changes as follows:
•
10 minutes
•
20 minutes
•
30 minutes
•
60 minutes
•
90 minutes
•
OFF
Note
Each time this button is pressed, the FM mode
changes as follows:
•
Stereo mode—ST lights up
•
Mono mode—ST turns off.
Note
If an FM stereo broadcast is poor due to a weak
broadcast signal, select the FM mono mode to
reduce the noise. The FM broadcasts are
reproduced in monaural sound.
Notes
•
The volume, tone (bass and treble), and
balance settings have no effect on the
recording signals.
•
When you select tuner, CD, or PHONO as a
recording source, recording may be made on
TAPE or AUX, or both simultaneously.
OR
OR
Note
While operating the sleep timer, the
lights up.
OR
OR