Insignia NS-LTDVD20 - Manual (Page 9)

7
Insignia NS-LTDVD20 20" LCD TV/DVD Combo
www.insignia-products.com
Setting up your TV combo
Connecting an antenna or cable or
satellite TV
To connect an external antenna, cable TV, or
satellite TV:
1 Remove the port cover on the back of your
TV combo (1).
2 Plug the antenna cable from an antenna,
cable TV, or satellite receiver (3) to the ANT.
IN jack on your TV combo (2).
3 Turn on your TV combo.
4 Press INPUT and the or to select TV.
Connecting a standard video device
To connect an standard video device to the
AV1 jacks:
1 Plug an RCA video cable (2) into a standard
video device (1) and into the VIDEO jack on
the back of your TV combo.
2 Plug the RCA audio cables (2) into the video
device’s audio output jack and into the upper
AUDIO L and AUDIO R jacks on the back of
your TV combo.
3 Turn on your TV combo.
4 Press INPUT and the or to select AV1.
To connect an external video device to the
AV2 jacks:
1 Plug the RCA video connector (7) into a
standard video device (1) and VIDEO jack (8)
on the side of your TV combo.
2 Plug the RCA audio connectors (6) into the
audio out jacks on the video device and into
the AUDIO L and AUDIO R jacks (8) on the
side of your TV combo.
3 Turn on your TV combo.
4 Press INPUT and the or to select AV2.
2
3
C B / P B
Y C R / P R
L
R
L
R
AUDIO VIDEO AUDIO
L
R
S-VIDEO INPUT OUTPUT INPUT 1
AUDIO A N T. I N
COAXIAL
1
Note
Your TV supports multiple video source inputs.
For temporary or easy-access video connections,
use the side jacks (AV2). For more permanent
connections, use the rear jacks (AV1).
VIDEO AUDIO
L
PHONES
VIDEO
L
AUDIO
INPUT 2 R
S-VIDEO INPUT 1
5
8
R
6
7
1
4
2
3