Integra DPS-5.4 - Manual (Page 20)

20
Connecting the DPS-5.4—Continued
1. Connect one of DIGITAL AUDIO OUTPUT jacks
on this player to a digital input on your AV
receiver.
This enables you to listen to surround sound.
For an optical connection, use an optical cable (not sup-
plied) to connect the “OPTICAL DIGITAL AUDIO
OUTPUT” jack to an optical input on your AV receiver.
For a coaxial connection, use a coaxial cable (similar to
the supplied video cable) to connect the “COAXIAL
DIGITAL AUDIO OUTPUT” jack to a coaxial input on
your AV receiver.
2. Connect the analog AUDIO OUTPUT L/R and
VIDEO OUTPUT jacks on this player to a set of
analog audio and video inputs on your AV
receiver.
The diagram shows standard video connections, but you
can alternatively use the S-Video or component video
connections if they’re available.
3. Connect the AV receiver’s video output to a video
input on your TV.
Tip:
• The DPS-5.4 has two composite video output connec-
tors and two pairs of stereo analog audio output con-
nectors. They output the same video and audio signals
respectively.
• You usually have to connect the same kind of video
cable between your DVD player and AV receiver, and
between your AV receiver and TV.
• The remote controller supplied with Integra/Onkyo
AV receiver or amplifiers can be used to control the
DPS-5.4.
• The function of the upper and lower connectors are
the same. Connect to either one.
• For remote control operation, you must make an ana-
log RCA/phono connection between your DPS-5.4
and the AV receiver or amplifier, even if they are con-
nected digitally.
COAXIAL OPTICAL
AV receiver
IN
FRONT
DVD
L
R
AV receiver
Connecting -compatible
Components
REMOTE
CONTROL
L
R
IN
DVD
AV receiver