I-O Display Systems Basic I/O Product - Manual (Page 68)

Installation 2
2-14(Vol.2)
Installing the I/O modules:
Certain guidelines must be followed when installing I/O modules on the BASIC I/O AD
Chassis. In particular the analog modules must be grouped separately from the digital
modules on each I/O chassis. Using the worksheets found on the next page, place the desired
I/O modules in the indicated positions.
BASIC I/O AD Module Placement Worksheet
Module# Analog/Digital Module PN Remarks
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1)Install all analog input modules beginning with module 0 the 1 and so on. If none are used,
skip this step.
2) Install Analog output modules beginning with the next available module position. If none
are used, skip this step.
3) Repeat step 2 for the digital input and digital output modules