I-O Display Systems Basic I/O Product - Manual (Page 55)

Installation 2
2-1(Vol.2)
Installation
Mounting:
BASIC I/O ADs come in 4, 8, and 16 channel versions. Figure 2-1 below shows the footprint
of each Basic I/OAD. Using corner holes, the unit can be mounted with 4- #6 or #8 round
head or pan head screws. The BIO16 version has two additional mounting holes located near
the center of the board as well. Hole locations in relation to the overall dimensions for each
are shown below.
Figure 2-1 BASIC I/O AD Footprint