Ikelite pdf #4104.6 ..... Nikonos TTL Cord Film Camera - Manual

This sync cord connects one (1) Ikelite Substrobe to a Nikonos IV, V, RS
camera, or suitable FILM camera housing that utilizes the Nikonos style
flash socket for external strobe connection. The Ikelite strobe will fire in
TTL automatic or manual exposure modes using the Nikonos V or RS
cameras. Strobe will only work in the manual mode with the Nikonos IV
camera.
The connector threads are very fine; DO NOT cross thread. If it is
difficult to turn, you are cross threading.
4104.6
Ikelite to Nikonos Style Coiled Cord
- ONLY Ikelite TTL Substrobes can be connected.
- DO NOT use the TTL cord on a non TTL strobe; you will damage the
camera.
- DO NOT remove sync cord from the strobe or camera underwater or
when wet. Connections are NOT waterproof when disconnected
underwater.
- DO NOT leave the cord connected for prolonged periods. Otherwise, the
cord may freeze to the strobe or camera. After each dive, disconnect the
cord and lightly lubricate the connector threads. Never use spray lubricant.