Infinite Peripherals KPM-210 User Manual
Page 87
3. PRINTER FUNCTIONS
KPM210/216
60
3-
[Notes]
• The lenght of residual paper reported is just as an indication
because tolerances and other factors are not taken into con-
sideration (paper thickness, roll core diameter, roll core thick-
ness). The virtual paper-end limit is set by the command GS
µ.
• To set virtual paper-end limit, measure the length of the
paper from near paper end to the end of the roll, using sev-
eral of them.
[Default]
[Reference]
[Example]
S
GS
GS
GS
GS
G
ΓΓΓΓΓ
[Name]
Reading number of cuts performed from the printer
[Format]
ASCII
GS
Γ
Hex
1D
E2
Decimal
29
226
[Description]
Reading the number of cuts performed from the printer.
The command return a string that points out how many cuts
are performed by the printer, for example if there are per-
formed 2376 cuts, it will be:
‘2376 cuts’
[Notes]
[Default]
[Reference]
[Example]
S
GS
GS
GS
GS
G
Π
Π
Π
Π
Π
[Name]
Reading of length (cm) of printed paper
[Format]
ASCII
GS
Π
Hex
1D
E3
Decimal
29
227
[Description]
Reading of length (cm) of printed paper.
The command return a string pointing out how much paper is
printed, for example if the printer has print about 2515,5 m, it
will be:
(Tab.A.3)
www.ipcprint.com