Infinite Peripherals KPM-210 User Manual
Page 66

3. PRINTER FUNCTIONS
3. PRINTER FUNCTIONS
KPM210/216
39
3-
[Description]
Turns white/black reverse printing mode on or off.
• When the LSB of n is 0, white/black reverse printing is
turned off.
• When the LSB of n is 1, white/black reverse printing is
turned on.
[Notes]
• Only the LSB di n is effective.
• This command is available for both built-in and user-defined
characters.
• This command does not affect bit image, downloaded bit
image, bar code, HRI characters and spacing skipped by HT,
ESC $ and ESC \.
• This command does not affect white space between lines.
• White/black reverse mode has a higher priority than under-
line mode. Even if underline mode is on, it will be disabled
(but not cancelled) when white/black reverse mode is se-
lected.
[Default]
n = 0
[Reference]
[Example]
m
n
0
C
S
G
m
n
0
C
S
G
m
n
0
C
S
G
m
n
0
C
S
G
m
n
0
C
S
G
[Name]
Select counter print mode
[Format]
ASCII
GS
C
0
n
m
Hex
1D
43
30
n
m
Decimal
29
67
48
n
m
[Range]
0
≤
n
≤
5
m = 0, 1, 2, 48, 49, 50
[Description]
Selects a print mode for the serial number counter.
• n specifies the number of digits to be printed as follows:
when n = 0, the printer prints the actual digits indicated by the
numeric value.
when n = 1 to 5, the command sets the number of digits to
be printed.
• m specifies the printing position within the entire range of
printed digits as follows:
www.ipcprint.com