IFoundry Systems IFSYS-5651 MSP430 - Manual (Page 24)

Page 24 of 50 Copyright © 2008 iFoundry Systems
IFSYS-5651 MSP430 Bluetooth Evaluation Kit User Guide
8 SETTING UP IFSYS-5043 FOR STAND-ALONE DEVELOPMENT
This section shows you how the IFSYS-5043 can be set up for stand-alone development in
which the IFSYS-5043 module hosts all the Bluetooth firmware and the applications you
develop for it within the module itself.
8.1 Development tools & environment
Development of stand-alone applications for the IFSYS-5043 module requires the
following tools:
• CSR BlueLab V3.6.2 or later,
• CSR BlueSuite 1.24 or later (contains PSTools for configuring the operation of the
Bluetooth radio, and BlueFlash for downloading firmware to IFSYS-5043 module)
• Windows PC to host the development environment,
• Programming Cable for IFSYS-5043 Bluetooth Module (Part number MECB02061)
(supplied as part of the Evaluation Kit).
With the exception of the Programming Cable for IFSYS-5043 Bluetooth Module, these
tools are available under license from Cambridge Silicon Radio. It is assumed that the
developer has access to these tools in order to develop stand-alone applications for the
IFSYS-5043 Bluetooth module. CSR can be contacted at www.csr.com.
CAUTION
The IFSYS-5053 Bluetooth module comes loaded with HCI Bluetooth firmware. It
is strongly recommended that you first save this firmware in case you need to
restore it at a future date. Bluetooth addresses are unique to each module and
you should note the specific IFSYS-5651 board that the saved firmware belongs
to. For instructions on how to save the HCI firmware on a IFSYS-5043 module,
please follow the instructions listed in Section 9.2 - Backing-up original IFSYS-
5043 firmware.