IFoundry Systems IFSYS-5651 MSP430 User Manual
Page 11
Page 11 of 50
Copyright © 2008 iFoundry Systems
IFSYS-5651 MSP430 Bluetooth Evaluation Kit User Guide
3.4
Modules / Components
The table below shows other important items related to the IFSYS-5651 board.
MODULE /
COMPONENT
NAME
DESCRIPTION / PURPOSE
CONNECTS TO
RJ45 cable
Programming cable used to programming the IFSYS-5043
module
Between PC and the
IFSYS-5043 module via
connector RJ1
IFSYS-5043
iFoundry Bluetooth Module (can be operated as an HCI
module, or stand-alone module)
MSP430, or external
host such as a PC
Prototyping area
For prototyping external circuitry
-na-
3.5
MSP430 General Purpose I/O (GPIO) signals
Following is a list of MSP430 GPIOs which are not tied to specific board functions and can
be freely designated for any purpose. The components may in later sections be referred
to by either name or reference designation. It may be helpful to reference the board
diagram on the previous page when locating these components. In the following sections,
the term “-nc-“ means “not connected”.
3.5.1 JP1
Header
Signals
JP1 HEADER SIGNALS
PIN
SIGNAL
MSP430
PIN
MSP430
PIN NAME
PIN
SIGNAL
MSP430
PIN
MSP430
PIN NAME
1 PIO-6-0
97
P6-0 2 PIO-6-1 98
P6-1
3 PIO-6-2
99
P6-2 4 PIO-6-3 100
P6-3
5
PIO-6-4 1
P6-4 6
PIO-6-5 2
P6-5
7
PIO-6-6 3
P6-6 8
PIO-6-7 4
P6-7
9
PIO-7-4 5
P7-4 10
PIO-7-5 6
P7-5
11
PIO-7-6 7
P7-6 12
PIO-7-7 8
P7-7