ION FILM 2 PC - Manual (Page 6)

6
USING THE FILM 2 PC
1
Plug the USB cable of the FILM 2 PC into your computer’s USB port. Once connected, the power LED
light will be blue.
Note: The first time you connect FILM 2 PC to your computer, wait a few
seconds until you see a dialog box that says "Found New Hardware" (this
means the computer recognizes the FILM 2 PC). After you see this,
FILM 2 PC is ready to use.
2
Insert the loaded film / slide holder properly into the slot as shown.
(Insert through front entrance)
3
Click on the
MediaImpression icon on the
desktop and you will see the
following.
4
Click "Acquire" and choose "Acquire from Scanner."
5a
Select the location to save your pictures.
5b
Select the proper film size and film type.
5c
Select the format in which you want to save your
images: JPG or TIF. (You can also select the
image quality.)