Insignia 09-0929 - Manual (Page 2)

ENGLISH 09-0929
© 2009 BBY Solutions, Inc. All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
8 Press  or  to highlight the Password field, then press
ENTER. An on-screen keyboard appears.
9 Press , ,  or  to highlight the first letter in the
password, then press ENTER. Repeat this step to enter
the rest of the password. If you make a mistake, use the
backspace key to delete the character
10 After you enter the password, highlight , then press
ENTER
to close the keyboard.
11 Press  to highlight OK, then press ENTER. The Network
List reopens.
12 If necessary, press
 or  to highlight the network again,
then press ENTER. The option list reopens.
13 Press  or  to highlight Connect, then press ENTER. If
the wireless network is working, you should see the
message shown below:
You may also briefly see a “connected” message appear on
the TV. Press ENTER to remove the message from the TV
screen.
If the message shown above does not appear, your Blu-ray
player is not connected to the network. Repeat this task again.
Connecting to a wireless network using WPS
(Wi-Fi Protected Setup) Push button
NOTE: The steps in this task are based on using the remote control that came
with your player.
To set up a network connection:
1 Press
ENTER. The Settings menu opens.
2 Press  or  to select Network. The Network menu opens.
3 Press , press  or  to highlight Wireless, then press
ENTER. A list of network options opens.
4 Press  or  to highlight WiFi Protected Setup, then
press ENTER. The following screen appears.
5 Press the WPS button on your router. The following
screen should appear. When you see “Success” on the
screen, your player is connected to the router.
6 Press ENTER to close the message.