Insignia NS-BRDVD3-CA - Manual (Page 22)

18
NS-BRDVD3-CA Blu-Ray Disc Player
www.insigniaproducts.com
Handling discs
• To keep a disc clean, do not touch the play side
(non-label side) of the disc.
• Do not attach paper or tape to the disc.
Cleaning discs
• Before playback, wipe the disc outwards from the
center (not in a circle) with a clean cloth.
FAQ (frequently asked
questions)
Troubleshooting
Check the following information for the possible
cause and solution for a problem before contacting
the nearest service center or dealer for repairs.
The following do not indicate a problem with your
player:
• Regular disc rotation sounds.
• Image disturbance during search.
Resetting your player
To reset your player:
• If your player “freezes,” press STANDBY/ON on
the front of your player. Wait five seconds then
press
STANDBY/ON again. This resets your
player but does not change any settings.
• To reset all settings (include parental control
settings) to the factory default, select Reset
Settings in the System menu.
Power
Question Answer
What do I need to play multi channel
surround sound? Connect the appropriate
amplifier/receiver to the HDMI jack,
the DIGITAL AUDIO OUT jack
(OPTICAL or COAXIAL).
Can I connect headphones to my
player? You cannot directly connect
headphones to your player. Connect
headphones to the connected TV or
sound system.
My television has COMPOSITE VIDEO
IN, COMPONENT(YUV) IN and HDMI IN
jacks. HDMI provides the best video and
audio. Component video provides
better video than composite video,
but not as good as HDMI video.
Composite video provides good video.
Note: When you connect a TV using
HDMI, the picture takes longer to
display.
Can I play Blu-ray Discs and DVDs
bought in another country? You can play them if the video
standard is NTSC. However, you
cannot play:
• Blu-ray Discs that do not
include region code A.
• DVDs that do not include
region code 1 or ALL.
Region codes are on the discs or disc
packaging.
Can I play Blu-ray Discs and DVDs that
do not have a region code? No. Region codes indicate that a disc
conforms to industry standards. You
cannot play a disc that does not have
a region code.
What types of discs will my player
play? Your player can play:
• Blu-ray Discs
• DVD-Video, DVD-RAM (DVD
Video Recording format,
AVCHD format, and JPEG
format), DVD-R/RW (DVD
Video format and DVD Video
Recording format), DVD-R DL
(DVD Video format and DVD
Video Recording format),
DVD+R, DVD+RW, and
DVD+R DL
• Audio CD
• CD-R/RW discs which have
been recorded in one of the
following standards: CD-DA
and still pictures (JPEG).
Close the session after
recording.
Note: Your player cannot write to
discs.
Problem Solution
No power Make sure that the power cord is
plugged into a power outlet and that
the outlet is supplying power.
The player switches to standby mode After a period of inactivity, your player
switches to standby mode
automatically. This is a power saving
feature.
If your player switches to standby
mode unexpectedly, a safety device
may have been activated. Press
STANDBY/ON on the front of your
player.
Question Answer