InFocus TD40 PAL - Manual (Page 22)

21 OWNER'S MANUAL
Connecting the Set Top Box
Turn on the Set Top Box.
Press INPUT button on the remote
control of the Monitor and select
Component1, Component2, PC
or DVI.
Connect Set Top Box video inputs to SCART, COMPONENT, PC or DVI jacks on the Monitor. Audio inputs
to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs.
How to connect
1
2
How to use
With SCART (Euro cable)
Connect a SCART cable to the SCART jacks of the
STB and the Monitor.
With Component
Connect a three separate component cables to the
component jacks of the STB and the Monitor.
Connect L (White) and R (Red) sound cables (composite)
to the sound jacks of the STB and the Monitor.
With RGB or DVI
Connect a D-Sub or DVI cable to the AV video jacks of
the STB and the Monitor.
Connect L (White) and R (Red) sound cables (composite)
to the sound jacks of the STB and the Monitor.
How to connect
• Component, PC and DVI ports can be displayed
only 1 signal among them. If one of them is
bong displayed, other sockets are unavailable.
Supported Signals
480i/60Hz
480p/60Hz
576i/50Hz
576p/50Hz
720p/50Hz
720p/60Hz
1080i/50Hz
1080i/60Hz
Component1 Component2 PC DVI