IBM 02L1333 User Manual
Page 3
Configuring the ATM Module
3
c
Ensure that the Port ID is set to the ATM port
number. The ATM port numbers are as follows:
3
Port 13 on an IBM 8271 Nways Ethernet LAN
Switch Model 612 and IBM 8271 Nways Ether-
net LAN Switch Model 712
3
Port 25 on an IBM 8271 Nways Ethernet LAN
Switch Model 624 and IBM 8271 Nways Ether-
net LAN Switch Model 524
d
Select the STATS button.
e
The ATM Port Statistics Screen is displayed.
f
Select the LEC button to displays statistics and
status information for the default VLAN that is
associated with the default ELAN (admin1).
An example of the ATM VLAN LEC Status screen is
shown in Figure 3.
Figure 3 ATM VLAN LEC Status Screen
g
If the default VLAN’s LEC State field displays a
value other than Active, and the Last LEC Failure
Reason shows a value other than None, an error
has arisen; see “Troubleshooting”.