Adjusting audio condition, Selecting bilingual signals – Marantz LC1500 User Manual
Page 42
206-3652
42
Adjusting audio condition
1
Press the
MENU
button to select the
screen display as below.
2
Press the channel (
5
5
,
∞
∞
) buttons to
select [MTS].
3
Press the volume (
2
2
,
3
3
) buttons to
select an audio mode you want.
4
Press the
ENTER
button.
* If some strange sound is heard when watching TV programs on stereo mode in poor signal
areas, or if in non-dual signal service area, make sure to select mono mode.
* [Stereo] or [Mono] mode can be available only when broadcasting signal contains the data.
Screen display in stereo signal : Stereo
Screen display in bilingual signal : SAP
* Bilingual (dual language) signal
●
This signal contains the secondary language signal in addition to the primary language.
●
There are the primary and secondary language and stereo modes in bilingual signal.
●
[Mono] : The primary language is output from left and right speaker. Signal mode is mono.
●
[Stereo] : The primary language is output from left and right speaker. Signal mode is stereo.
●
[SAP] : The secondary language is output from left and right speaker.
●
Each press of volume (
2
2
,
3
3
) buttons
changes the screen display as below.
Mono
Stereo
SAP
Use
5
5∞
∞2
2 3
3
And ENTER
AVL
Off
DASP
User
Equalizer
MTS
Strero
Use
5
5∞
∞2
2 3
3
And ENTER
AVL
Off
DASP
User
Equalizer
MTS
Strero
Selecting bilingual signals
Selecting bilingual signals