Marantz VP8100 - Manual (Page 18)

14
OPERATIONS
ENGLISH
– 2-3 P/D
Select either auto or off from the 2-3 P/D system.
– COMPONENT
When set to AUTO, a video system is automatically selected as
either NTSC, 480p, 720p, or 1080i. When AUTO does not work
out, select an appropriate system from either NTSC, 480p,
720p, or 1080i.
– ALL RESET
When the user selects “YES”, the following message appears:
Again, select “YES”, and press the ENTER key. Then restore
the factory default settings except for the lamp life and RGB
ADJUST MEMORY.
– RESET LAMP
When the user selects “YES”, the following message appears:
Again, select “YES”, and press the ENTER key. Then the lamp
life is initialized.
1. Use the į/Ĭ keys to select an item.
2. Use the ǡ/Ǡ keys to change the setting
3. Press the ENTER key to restore.
{ For video input signals, the following settings can
be made:
í ASPECT
í TRIG.2 OUT
í LANGUAGE
í CEILING
í REAR
í COMPONENT (AUTO, NTSC, 480p, 720p, 1080i)
í 2-3 P/D (AUTO, OFF)
í RESET LAMP
í RESET ALL
– TRIG.2 OUT
Select 12 V DC from on and off at each aspect discretely.
– LANGUAGE
Select the language used in the on-screen menu.
The available languages are English, French, and Spanish.
Setting
12 V DC
12 V DC
12 V DC
12 V DC
ON
FULL
SQUEEZE
4:3
ZOOM
ASPECT
0 V
0 V
0 V
0 V
OFF