Marantz CR601 - Manual (Page 29)

25
ENGLISH
OTHER OPERATION
TIMER PROGRAMS
7 About the Timer Programs
• This unit has three timer programs so that you
can turn it on and off automatically at certain
times and on certain days of the week.
• Timer programs can be set for single operation
(Once) or everyweek operation (Everyweek) or
everyday operation (Everyday) or the days of
the week operation (Weekday).
7 Timer Program Examples
• The following examples highlight some of the
ways in which you can use the timer programs.
Timer program 1: To wake up to your favorite
radio station every morning, set as follows:
TIMER PROGRAM 1 SET → FM/AM → A1 FM
87.50MHz → EVERYDAY → ON TIME=
7:00AM → OFF TIME= 7:30AM
(If you want a radio alarm only on weekdays,
select “WEEKDAY” instead of “EVERYDAY”
and specify “MON-FRI”.)
Timer program 2: To listen a radio program on
only this Sunday, set as follows:
TIMER PROGRAM 2 SET
→ FM/AM → B1
AM522kHz → ONCE → SUNDAY → ON
TIME= 9:00PM → OFF TIME=10:00PM
7 Timer Program Overlap
• If two or three timer programs are set to the
same ON TIME, the timer program with the
lowest number has priority.
For example, if Timer program 1 and Timer
program 2 are both set to an ON TIME of
7:00AM, Timer program 1 has priority and Timer
program 2 is ignored.
Timer program 1: 7:00AM - 1:00PM
(This timer has priority)
Timer program 2: 7:00AM - 0:30PM
If the setting of the two timer program overlaps,
the earlier timer has priority.
Timer program 1: 9:00AM - 10:00AM
Timer program 2: 8:00AM - 10:00AM
(This Timer program has priority)
7 Timer Program Setting
• You must set the clock time before you set the
timer programs.
• You need to store preset stations before you set
the timer programs.
1. Press the TIMER button x , “ TIMER
PROGRAM 1 ” is displayed.
2. The display changes as follows each time the
Easy JOG 4 / ¢ knob !5 is turned or the 5
or ∞ button c is pressed.
3. Press the Easy JOG 4 / ¢ knob !5 or
ENTER button b to select timer program
number.
4. The display indicate “ TIMER PROGRAM x
SET ”.
Either turn the Easy JOG 4 / ¢ knob !5 or
press the 5 or ∞ button c , the display changes
as follows.
• If timer program is already available, to select
“ TIMER PROGRAM x CONFIRM ” to scroll the
timer setting contents.
• If timer program is already available, to select
“ TIMER PROGRAM x ON ” to activate the
timer.
• To select “ TIMER PROGRAM x OFF ” to turn
off the timer program.
5. Press the Easy JOG 4 / ¢ knob !5 or
ENTER button b to select “ TIMER PROGRAM
x SET ”.
TIMER PROGRAM x OFF TIMER PROGRAM x ON
TIMER PROGRAM x SET TIMER PROGRAM x CONFIRM
TIMER PROGRAM 3
TIMER PROGRAM 1 TIMER PROGRAM 2
6. The display indicate “ TIMER PROGRAM x
FM/AM ”. Either turn the Easy JOG 4 / ¢
knob !5 or press the 5 or ∞ button c , the
display changes “ TIMER PROGRAM x FM/AM ”
or “ TIMER PROGRAM x DAB ”.
7. Press the Easy JOG 4 / ¢ knob !5 or
ENTER button b to select “ CD ”, “ DAB ”,
“ FM/AM ”, “ TAPE ”, “ MD ” or “ DVD ”.
8. Either turn the Easy JOG 4 / ¢ knob !5 or
press the 5 or ∞ button c to select Preset
station to be programed.
9. Select the Operation method.
q Either turn the Easy JOG 4 / ¢ knob !5
or press the 5 or ∞ button c to select
operation method “ ONCE ”, “ EVERYWEEK ”,
“ EVERYDAY ” or “ WEEKDAY ” .
w Press the Easy JOG 4 / ¢ knob !5 or
ENTER button b to decide the operation.
When you select “ ONCE ” or “ EVERYWEEK ”,
you can select the day of the week by turning
the
Easy JOG 4 / ¢ knob !5 or pressing
the 5 or ∞ button c .
When you select “ WEEKDAY ”, use the
Easy JOG 4 / ¢ knob !5 or pressing
the 5 or ∞ button c to select the first day,
and then press the Easy JOG 4 / ¢
knob !5 or ENTER button b .
Use the Easy JOG 4 / ¢ knob !5 or
pressing the 5 or ∞ button c to select the
last day.
Then press the
Easy JOG 4 / ¢ knob
!5 or ENTER button b .
10. Set the On time.
q Either turn the Easy JOG 4 / ¢ knob !5
or press the 5 or ∞ button c to adjust the
hour for the On time and press the Easy
JOG 4 / ¢ knob !5 or ENTER button
b .
w Either turn the Easy JOG 4 / ¢ knob !5
or press the 5 or ∞ button c to adjust the
minutes for the On time and press the
Easy JOG 4 / ¢ knob !5 or ENTER
button b .
11. Set the Off time.
q Either turn the Easy JOG 4 / ¢ knob !5
or press the 5 or ∞ button c to adjust the
hour for the Off time and press the Easy
JOG 4 / ¢ knob !5 or ENTER button
b .
w Either turn the Easy JOG 4 / ¢ knob !5
or press the 5 or ∞ button c to adjust the
minutes for the Off time.
12. Set the timer program.
q Press the Easy JOG 4 / ¢ knob !5 or
ENTER button b to decide the timer
program setting.
Standby indicator lights up green and
setting contents are scrolled.
Notes
• Timer program can activate regardless of power
on or standby mode.
• When timer program is finished, the unit goes to
standby mode.
• When timer program is activated, standby
indicator lights green.
• You can cancel the Timer program setting
procedure at any time by pressing the TIMER
button x .