MITSUBISHI ELECTRIC APRICOT 340 - Manual (Page 59)

M a i n t a i n i n g & T r a n s p o r t i n g
APRICOT 340 OWNER’S HANDBOOK 5/3
6. Use clear water, or water with a mild detergent, to clean the
ball. Then dry it with a clean, lint-free cloth.
7. Put the ball back in its socket and replace the plastic cover. It
should click into place.
Transporting the computer
Use common sense when handling the computer; hard disks in
particular can be damaged if the computer is dropped or handled
roughly. As a precaution, back up (copy) the contents of the hard
disks to tape or diskettes before moving the computer.
Don’t try to move the computer while it is plugged into the AC
power supply or with any other cables, including network cables,
still attached.
When lifting and carrying the computer, grip the metal underside of
the system unit. Do not lift the unit by the plastic side trims or the
front bezel. Never attempt to use the door as a carrying handle.
Never attempt to lift the system unit with a monitor on top.
If you need to transport the computer any great distance, use the
original packing materials.
If you intend to use the computer in another country, see the next
section for some important advice.
Using the computer in another country
The computer arrives ready to work with the commercial AC power
supply available in the country in which it is first sold.
If you plan to use the computer in another country, you should first
check the following facts about your destination:
♦
The voltage and frequency of the commercial AC power
supply.
♦
The type of plug required for the AC power outlets.