beautypg.com

Marantz CD6002 User Manual

Page 8

background image

5

ENGLISH

BEFORE USING

7 Loading batteries

Before using the remote controller for the first time,
load the batteries in the remote controller. The
batteries provided are used to verify the operations
of the remote controller only.

1

Remove the battery cover.

2

Insert the batteries with correct +/– orientation.

3

Close the battery cover until it clicks shut.

7 Cautions on handling batteries

Misuse of the batteries can result in electrolyte
leakage, rupturing, corrosion, etc.
Bear in mind the following points when using
batteries.

• Remove the batteries from the remote control

unit if the unit is not going to be used for a
prolonged period (a month or more).

• Do not use an old battery together with a new

one.

• Insert the batteries while ensuring that their

ª and · poles are properly aligned with the
corresponding markings on the remote control
unit.

• Batteries with the same shape may have different

voltages. Do not use different types of batteries
together.

• If electrolyte has leaked, thoroughly wipe the

inside of the battery compartment, and then
insert new batteries.

• When batteries which are no longer required

are to be discarded, follow the directions
(regulations) laid down by the local authorities in
the area concerned for their disposal.

7 Usage of remote controller

Operational range

Operate the unit with the remote controller within
the range of the illustration below.

5m

60°

Precautions

• Do not allow direct sunlight, an inverter fluorescent

light or other strong source of light to shine onto
the player’s infrared signal reception window
(remote sensor). Otherwise, the operation of the
remote control unit may be disabled.

• Bear in mind that operating the remote control

unit may cause other devices operated by
infrared rays to be operated by mistake.

• The remote control unit cannot be operated if the

space between the controller and the player’s
remote sensor is obstructed.

• Do not place any objects on top of the remote

control unit. Doing so may cause one or more
buttons to be held down which will cause the
batteries to run down.