Marantz CD6002 - Manual (Page 20)

17
ENGLISH
ADVANCED OPERATIONS –AUDIO CD–
4. Once all the tracks have been programmed,
press the 7 button on the player or remote
control unit or press the PROGRAM button on
the remote control unit.
The PROG indicator stops flashing and lights
up instead, and the program is entered.
TEXT 2 4 6 8 10
TTL TTL TIME PROG
Light up
5. Press the 3 button on the player or remote
control unit. Play now starts in the programmed
sequence.
Program play will start even when step 4 is
omitted.
7 Program play in the text display
mode
In the case of a CD-TEXT disc, tracks can be
selected by title for program play.
If the main display is set to the time display mode,
press the TEXT button on the remote control unit to
establish the text display mode.
TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
1. During stop, press the PROGRAM button on the
remote control unit.
“Program” appears for an instant on the main
display. Then the PROG indicator flashes, and
the program mode is established.
TEXT
PROG 5 5 5
5 5 5 5 5
Flashes
2. Press the 4 and ¢ buttons on the remote
control unit or 4/1 and ¡/¢ buttons on
the player to select the track. (The track can
also be selected using the numeric buttons on
the remote control unit but in this case the title
is not displayed).
The title of each selected track is scrolled, and
once it has been scrolled, it is programmed
automatically. If you do not want to program the
track, select another track before the scrolling is
completed.
TEXT 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
3. Repeat step 2 to program the desired
tracks in sequence. Up to 30 tracks can be
programmed.
4. Once all the tracks have been programmed,
press the 7 button on the player or remote
control unit or press the PROGRAM button on
the remote control unit.
The PROG indicator stops flashing and lights
up instead, and the program is entered.
TEXT 2 4 6 8 10
TTL TTL TIME PROG
Light up
5. Press the 3 button on the player or remote
control unit. Play of the selected tracks now
starts in the programmed sequence.
Program play will start even when step 4 is
omitted.
Note:
Programming in the text display mode cannot
be performed for tracks which have no text
information for their titles.