Marantz CD6002 - Manual (Page 19)

16
ENGLISH
PROGRAM PLAY
(PLAYING TRACKS IN THE
PREFERRED SEQUENCE)
The order in which the CD tracks are played can
be rearranged into the sequence desired. Up to 30
tracks can be programmed.
7 Program play in the time display
mode
In the case of a CD-TEXT disc, first press the TIME
button on the remote control unit to set the main
display to the time display mode.
TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
TTL TTL TIME
1. During stop, press the PROGRAM button on the
remote control unit.
“Program” appears for an instant on the main
display.
TEXT
PROG 5 5 5
5 5 5 5 5
Flashes
The PROG indicator flashes, and the program
mode is established.
TEXT
TTL TTL TIME PROG 5 5 5
5 5 5 5 5
Flashes
2. Press the numeric buttons on the remote
control unit the tracks can also be selected
using the
4 and ¢ buttons on the remote
control unit or 4/1 and ¡/¢ buttons on
the player. To select track number 10 or above,
use the numeric buttons to select the higher
digit first and then select the lower digit.
Display example: When track 2 has been
selected
TEXT 2
TTL TRK TTL TIME PROG 5 5 5
5 5 5 5 5
Flashes
3. Repeat step 2 to program the desired tracks in
sequence. At each step of the programming,
the number of tracks programmed and their
total time appear on the main display. Up to 30
tracks can be programmed.
TEXT 2 4 6 8 10
TTL TRK TTL TIME PROG 5 5 5
5 5 5 5 5
Flashes
3. Press the ENTER button of the remote control.
The currently time setting will be displayed
(at the time of purchase, this is set to 10
seconds).
4. Set the desired time with the 4 or ¢ buttons
(5 - 60 s).
5. After setting the time, press the ENTER button.
The display will return to normal.
Note:
• If there is a period of more than 4 seconds during
this procedure in which a key is not pressed, the
setting at that time will be set, and the display will
return to displaying the time.
• If the POWER button on the CD player or the
POWER button on the remote control is pressed,
even if the machine goes into STANDBY, the
most recently-set time will be kept. In the event
of the power cord being removed from the player
or from the power supply outlet, the setting will
revert to the default (10s).
ADVANCED OPERATIONS –AUDIO CD–