Marantz CDR510 User Manual
Page 12
- 12 -
ERASE
R e c o r d a
b l e
PLAY MODE
CD RECORDER / CD PLAYER CDR510
I
R
POWER
CDR
CD
FINAL
REC
MODE
MENU/
STORE
INPUT
CANCL/
DELETE
PUSH ENTER
REC LEVEL / SELECT
TIME
TEXT
PROG
ALBUM
MP3
PITCH
HEADPHONE
LEVEL
0
10
PROFESSIONAL
2 1 3
7 9 6 5 4
How to Record
• Recording takes place on the CDR drive
only.
• The recording procedure is the same for CD-
R and CD-RW discs.
• Use discs compatible with a 1X write speed.
See page 49.
• If the disc already contains recordings, the
CDR510 will automatically locate the end of
the last recorded track and start from there.
• Tracks from the CD drive can be
programmed for recording. See page 45.
• Recorded CDs must be finalized before
being playable on a regular CD player.
See page 46.
Internal REC modes
There are four recording modes for recording
from the CD drive.
The CDR510 must be in CHANGER mode
for internal recording.
RECORD FAST – double speed recording of a
disc or programmed tracks.
REC LISTEN – listening to a recording while
making it.
MAKE CD – double speed recording with
automatic finalizing.
REC MP3 DISC – listening to an MP3 disc while
recording 80 (or 74) minutes of the disc to
audio format on a standard CD disc.
See page 40 for more details about Recording
modes.
4. If programmed tracks are to be recorded do
the programming. See page 45.
5. If desired, adjust menu settings for AUTO
TRACK, see page 31, AUTO STOP, see page
32, or COPY protection, see page 35. Most
commonly, AUTO TRACK and AUTO STOP
should be set to ON.
6. Push and release the REC MODE button to
tab through Recording mode choices.
7. When correct, push and release the REC
button .
8. When done check or add CD Text.
See page 29.
9. Except for MAKE CD, finalize the disc. See
page 46.
To record from the CD drive:
1. Push and release the PLAY MODE button to
select CHANGER mode.
2. Place a recordable CD-R or CD-RW disc in
the CDR drive.
3. Place the CD to be recorded from in the CD
drive.