Multi-Tech Systems MVP 800 - Manual (Page 4)

Page 4 of 4
MultiVOIP Software Version 3.01C Product Update
The Billing/Security tab displays the parameters for billing options, call authentication, and automatic
disconnection.
12. You can set up billing options for inbound and/or outbound calls by checking them in the Billing
Options group and then entering the charge in cents per number of seconds.
13. Password protection can be enabled for outbound and/or inbound calls on the selected voice/fax
channel. If you enable Call Authentication on inbound and/or outbound calls, you need to enter a
password of up to 14 numeric characters in the Password field.
14. The Automatic Disconnection option limits call duration to the number of seconds entered in the
Disconnect After: (sec) field. The default value of 180 seconds can be changed to any other value up
to 65,535 seconds (approximately 18.2 hours).
Note: After configuring a given channel, you can copy that channel’s configuration to the other channel
by clicking the Copy button. Everything on the Billing/Security tab will be copied to the other channel.
If your country/region is not the default USA, click the Regional tab and proceed to step 15; otherwise,
proceed to step 16 to begin building your phone directory database.
Multi-Tech Phone Changes: Effective immediately, Multi-Tech's area code for tech support or faxing has
been changed to 763. All references in current Multi-Tech documentation should be changed from 612 to 763.