Marantz VP4001 - Manual (Page 30)

Basic
Operation
29
On-screen Display
1
2
Turning the Power off (Putting
the Projector into Standby Mode)
Press / I STANDBY/ON on the
projector or aSTANDBY on the re-
mote control to put the projector
into standby mode.
Unplug the power cord from the AC
outlet after the cooling fan stops.
• The power indicator on the projector
blinks in green while cooling.
• The power indicator changes to red when
the projector finishes cooling.
• Do not unplug the power cord during projection
or cooling fan operation. This can cause dam-
age due to rise in internal temperature, as the
cooling fan also stops.
• When on standby, power to the projector is not
OFF completely. If not planning to use the pro-
jector for an extended period of time, unplug
the AC power cord from AC power outlet as ex-
plained above.
Info
C1
V
C2 S
STANDBY
COMP.1 COMP.2 S-VIDEO
VIDEO RGB HDMI
RGB HDMI
ON ON
KEYSTONE MENU
STANDBY
STANDBY STANDBY
button
C1
V
A
C2 S
STANDBY
COMP.1 COMP.2 S-VIDEO
VIDEO RGB HDMI
RGB HDMI
R/C
SYNC
ON ON
KEYSTONE MENU
RETURN ENTER
AUTO SYNC ASPECT
IMAGE SHIFT RGB/COMP. PICTURE MODE
PIC
FREEZE IRIS
IRIS
C1
V
C2 S
COMP.1 COMP.2 S-VIDEO
VIDEO RGB HDMI
RGB HDMI
C1
V
C2 S
COMP.1 COMP.2 S-VIDEO
VIDEO RGB HDMI
RGB HDMI
Switching the Input Mode
Press the appropriate INPUT button on
the remote control to select the desired
input mode.
• When pressing INPUT (P/R) on the projector, in-
put mode switches in the following order:
Comp. 1 Comp. 2 S-Video
HDMI RGB Video
Select the appropriate input mode for
the connected equipment.
INPUT buttons
Image Projection
06.7.19, 4:26 PM Page 29