Marantz VP4001 - Manual (Page 26)

Connections
25
When connecting the component video equipment to the computer-RGB/
component input terminal on the projector (RGB)
DVD, etc.
ASPE CT ENTE R INPUT
MENU INPUT
STAN DBY /ON LAMP TEM P.
To component output
(Y, C
B /P B , C R /P R ) terminal
To RGB terminal
3 RCA to 15-pin
D-sub cable
When connecting to equipment with HDMI output teminal (HDMI)
HDMI is a new specialized interface capable of delivering a video and audio signal to
the terminal using just one cable. Since this projector does not support an audio signal
by itself, use an amplifier or other audio device.
For video connection, use a cable that conforms to HDMI standards. Using cables that
do not conform to HDMI standards may result in a malfunction.
ASP ECT ENT ER INPU T MEN U INPU T
STAND BY/O N LAM P TEM P.
HDMI compatible device
To HDMI output terminal
To HDMI terminal
HDMI cable (type A)
(commercially available)
Note
• HDMI (High Definition Multimedia Interface) is a digital AV interface that can deliver a high-defini-
tion video signal, multi-channel audio signal, and bi-directional control signal all in just one cable.
• Because it is compatible with the HDCP (High-bandwidth Digital Content Protection) system, the
digital video signal does not degrade when transmitted, and a high-quality image with a simple
connection can be enjoyed.
• When a DVI to HDMI conversion cable is connected to the HDMI terminal, a proper picture may not
be displayable.
06.7.19, 4:25 PM Page 25