Assembly – Gold's Gym XR25 GGBE24320 User Manual

Page 5

Decal

Before beginning assembly, carefully read the
following information and instructions:

• Assembly requires two people.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing
materials until assembly is completed.

• Tighten all parts as you assemble them, unless

instructed to do otherwise.

• As you assemble the weight bench, make sure all

parts are oriented as shown in the drawings.

• For help identifying small parts, use the PART

IDENTIFICATION CHART.

The following tools (not included) are required
for assembly:

• Two adjustable wrenches

• One rubber mallet

• One standard screwdriver

• One Phillips screwdriver

• Lubricant, such as grease or petroleum jelly,

and soapy water.

Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.

Make Things Easier for Yourself

Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.

ASSEMBLY

Press a 51mm x 76mm Inner Cap (27) into the
Front Leg (3).

Attach the Front Leg (3) to the Bench Frame (2)
with the two Small Support Plates (11), four M10
x 68mm Bolts (33), and four M10 Nylon Locknuts
(32). Do not tighten the Locknuts yet.

2. Press a 50mm x 100mm Inner Cap (17) into the

indicated end of a Base (4). Press a 50mm x
100mm Angled Inner Cap (18) into the other end
of the Base.

Attach the Base (4) to the Cross Frame (1) with
two M10 x 68mm Bolts (33), a Large Support
Plate (12), and two M10 Nylon Locknuts (32). Do
not tighten the Locknuts yet. Be sure the
parts are oriented as shown in the drawing,
with the warning decal in the indicated loca-
tion.

Repeat this step with the other Base (4).

Before beginning assembly, be sure that
you understand the information in the box
above.