Gefen EXT-TV-MFS - Manual (Page 13)

9
IR REMOTE CONTROL
Installing the Battery
The Remote Control unit ships with two batteries. One battery is required for
operation and the other battery is a spare.
1. Remove the battery cover on the back of the IR Remote Control unit.
2. Insert the included battery into the open battery slot. The positive (+) side
of the battery should be facing up.
3. Replace the battery cover.
Setting the IR Channel
The IR channel on the IR Remote Control must match the IR channel used by the
TV Multi Format Switcher. For example, if both DIP switches on the IR Remote
Control unit are set to IR channel 0 (both DIP switches down), then the TV Multi
Format Switcher must also be set to IR channel 0. See page 12 for information
on how to change the IR channel on the TV Multi Format Switcher.
Remote Channel 2: Remote Channel 3:
Remote Channel 1:
DIP switches y Battery slot
Channel 0 (default):
y
1 2
ON
1 2
ON
1 2
ON
1 2
ON
1 2
WARNING: Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.