Go-Video VR3840 User Manual
Page 45

RECORDING
45
Recording from an External Input
Recording from External Components
You can record from an external component, such as a
camcorder or VCR, connected to any of the DVD
Recorder+VCR’s external inputs.
11
Make sure the component you want to record
from is connected properly to the DVD
Recorder+VCR; see page 18.
2
2
Press INPUT repeatedly to select the external
input to record from.
• Tuner: Built-in tuner
• AV1: Audio/Video Input on back panel
• AV2: Audio/Video or S-Video Input on front panel
3
3
Load a recordable disc or tape.
4
4
Set the desired Recording quality by pressing
REC MODE repeatedly.
DVD: XP (1 hr/disc), SP (2 hrs/disc), LP (4
hrs/disc), EP (6 hrs/disc)
VCR: SP (Standard Play), SLP (Super Long Play -
3 times SP)
5
5
Press REC (z) once.
Recording will start. The REC indicator lights on the
front panel display.
Recording continues until you press STOP (
x
) or the
disc is full.
To record for a fixed length of time, see “One Touch
Record” on page 42.
6
6
Press STOP (x) to stop recording.
ote
If your source is copy-protected, you will not be able to record
it using the DVD Recorder+VCR. See “Copyright Notice” on
page 9 for more details.
About Playing Recordings on Other
DVD Players
Most regular DVD players can play finalized discs
recorded in Video mode. A small number of players can
also play DVD-RW discs recorded in VR mode, finalized
or not. Check the manual that came with the player to
check what kinds of discs it will play.
Finalizing a Disc
Finalizing ‘fixes’ the recordings and edits in place so
that the disc can be played on a regular DVD player or
computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing DISC
MENU/LIST or TITLE. To finalize a disc, refer to “Disc
Finalize” on page 26.