Go-Video VR3840 - Manual (Page 19)

CONNECTIONS & SETUP
19
Setup Menu Overview
The DVD Recorder+VCR Setup menu includes system
settings in six categories GENERAL, LANGUAGE,
AUDIO, LOCK, RECORD and DISC. Press SETUP on
the remote control to view the first and second levels of
the Setup menu, and press B to display the third level .
You will see the “B” symbol on the right side of the
menu label whenever additional levels are available.
Setup Menu Navigation
11 Press SETUP.
The Setup menu appears.
2 2 Use v / V to select the desired option.
3 3 While the desired item is selected, press B to
move to the second level.
4 4 Use v / V to select the second desired option.
5 5 Press B to move to the third level.
6 6 Use v / V to select the desired setting then
press ENTER to confirm your selection.
Some items require additional steps. Press b or
RETURN (O) at any time to return to the previous
menu.
77 Press SETUP to exit the Setup menu.
GENERAL Settings
Tuning Band
11 Press SETUP.
The Setup menu appears.
2 2 Use v / V to select the GENERAL option.
3 3 While the GENERAL option is selected, press B
to move to the second level.
4 4 Use v / V to select the Tuning Band option.
5 5 Press B to move to the third level.
6 6 Use v / V to select the tuning band option (TV
or CATV) then press ENTER.
TV: If you are using a standard antenna to receive
channels.
CATV: If you are using basic cable to receive chan-
nels.
Auto Channel Set
The DVD Recorder+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD Recorder+VCR to the desired type of
antenna or cable TV system, as shown in “Connecting
Antenna/Cable” on page 15.
11 Press SETUP.
The Setup menu appears.
2 2 Use v / V to select the GENERAL option.
3 3 While the GENERAL option is selected, press B
to move to the second level.
4 4 Use v / V to select the Auto Channel Set option.
5 5 Press B to move to the third level.
The Start icon is highlighted.
6 6 Press ENTER to begin the channel search.
The tuner will automatically search for all
available channels in your area and place them in
the tuner’s memory.
ote
After the Auto Channel Set is complete, follow the
instructions at left to make sure the Tuning Band is set
correctly (TV or CATV).
Initial Setup
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
TV
CATV
Prev. Select Close
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
11%
Stop
Prev. Select Close