Gefen GEF-DVIKVM-848DL - Manual (Page 11)

8
CONNECTING THE 8X8 DVI KVM DUAL LINK MATRIX
How to Connect the GefenPRO 8x8 DVI KVM Dual Link Matrix
1. Connect up to 8 DVI source devices to the DVI inputs on the rear panel of
the GefenPRO 8x8 DVI KVM Dual Link Matrix using the supplied DVI cables.
2. Connect up to 8 DVI monitor to the DVI outputs on the rear panel of the
GefenPRO 8x8 DVI KVM Dual Link Matrix with user-supplied DVI cables.
3. Connect the included AC power cable to the power receptacle on the
rear panel of the GefenPRO 8x8 DVI KVM Dual Link Matrix. Connect the
opposite end of the cable into an available electrical outlet.
How to Operate the GefenPRO 8x8 DVI KVM Dual Link Matrix
The GefenPRO 8x8 DVI KVM Dual Link Matrix offers a number of control
options. The following methods can be used to control basic routing functions of
the GefenPRO 8x8 DVI KVM Dual Link Matrix:
1. Front Panel Control Buttons - Pages 9 and 10
2. IR Remote Control - Pages 11 - 13
3. RS-232 Serial Control - Pages 16 - 30
4. IP Control - Pages 31 - 38
Wiring Diagram for the GefenPRO 8x8 DVI KVM Dual Link Matrix
GEF-DVIKVM-848DL
DVI Dual Link Displays
USB Keyboards
USB Mice & Speaker
DVI DUAL LINK CABLE
AUDIO CABLE
USB CABLE
8x
DVI Dual Link Sources
USB Sources
Audio Sources
8x
Matrix Matrix
Attention:
This product should always be connected to a grounded
electrical socket.