Fujitsu Siemens Computers N6210 User Manual

Page 19

Hard Disk Drive Sequence Submenu of the Boot Menu

The Hard Disk Drive Sequence Submenu is for setting the order in which multiple hard disk drives are sequenced.

Figure 19. Hard Disk Drive Sequence Submenu

Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the Esc key then, if you wish to move to another
menu, use the cursor keys.

Table 19: Fields, Options and Defaults for the Hard Disk Drive Sequence Submenu of the Boot Menu

Menu Field

Description

Device Name

.
.
.

Device Name

When more than one hard disk drive is attached to the system, the selection order determines the order in which
the drives are sequenced during boot up. To change the order, highlight one source by using the [up] or [down]
cursor keys and then press the [PgUp] or [PgDn] key to change the order number.

424040M9AT00

SHITADVD-RAM UJ-831S

xx/xx

0h - FFFFh

Clear

rd Is:

Clear

Intel(R)

Speed:

L1 Cache

L2 Cache

Memory

Total:

Slot

Boot Menu

Pre-Boot Execution Environment

Boot Device Priority

Hard Disk Drive Sequence

HITACHI_DKXXXXXXX

Cancel

B o o t M e n u