Fujitsu Siemens Computers LifeBook B3000 - Manual (Page 11)

11
Table 4: Fields, Options and Defaults for the Serial/Parallel Port Configurations Submenu of Advanced
Menu
Menu
Field
Options Default Description
Serial Port: • Disabled
• Enabled
• Auto [Enabled] Configures the serial port using either no configuration (Dis-
abled), a user defined configuration (Enabled), or by allowing
the BIOS or OS to choose the configuration (Auto).
I/O
Address: • 3F8 - 3FF
• 2F8 - 2FF
• 3E8 - 3EF
• 2E8 - 2EF [3F8 - 3FF] Allows user to set the serial port base I/O address when serial
port is Enabled.
Interrupt: • IRQ 3
• IRQ 4
• IRQ 10
• IRQ 11 [IRQ 4] Allows user to set the serial port interrupt when serial port is
Enabled.
Touch
Panel: • Disabled
• Enabled
• Auto [Enabled] Enables or disables the Touch Panel, or allows the Plug & Play
operating system to choose the configuration (Auto).
I/O
Address: • 3F8-3FF
• 2F8-2FF
• 3E8 - 3EF
• 2E8 - 2EF [2E8 - 2EF] Allows user to set the touch panel I/O address when the
touch panel is Enabled.
Interrupt: • IRQ 3
• IRQ 4
• IRQ 10
• IRQ 11 [IRQ 3] Allows user to set the touch panel interrupt when the touch
panel is Enabled.
Parallel
Port: • Disabled
• Enabled
• Auto [Enabled] Configures the parallel port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
Mode: • Output Only
• Bi-directional
• ECP [Bi-directional] When the parallel port is enabled this option is available
allowing the user to set the mode for the parallel port.
Bi-directional allows two-way transfer of information
between your notebook and a connected parallel device.
Output Only (Half Duplex) allows information to be
transferred in only one direction, from your notebook to the
printer or similar device. ECP Mode allows communication
with the ECP class of parallel I/O devices.
I/O
address: • 378 - 37F
• 278 - 27F
• 3BC - 3BF [378 - 37F] Allows user to set the parallel port base I/O address when the
parallel port is Enabled.
Interrupt: • IRQ 5
• IRQ 7 [IRQ 7] Allows user to set the parallel port interrupt when the parallel
port is Enabled.
A d v a n c e d M e n u