Furuno COLOR LCD SOUNDER FCV-600L - Manual (Page 14)

6
Enlarging a nav data indication
You can enlarge and display one of the data
indications as follows:
1. Press ▲ or ▼ to select the indication you
want to display. A blue cursor circum-
scribes your selection. For example, se-
lect the waypoint data window.
2. Press s to enlarge the data.
0
20
40
60
80
WP
ABC
RNG
12.0
nm
BRG
123. 4 °
XTE
1. 23
nm
Figure 1-13 WP data window enlarged
3. To return to the full data display, press t.
Graphic displays
There are two types of graphic displays and
you can select which one to display on the
SYSTEM MENU1.
Graphic display 1
This display provides analog and digital dis-
plays of cross-track error (XTE), course and
bearing. It is useful for monitoring progress
toward a waypoint. The XTE scale in the cen-
ter of the display, graduated in increments of
0.1 nm, shows cross-track error, the direction
and distance the boat is off course. In the ex-
ample below the XTE marker (red) shows the
boat is off course by 0.2 nm starboard. There-
fore you would steer left by the same distance
to return to course.
DEP
69.4
m
TMP
18. 1 °
C
RNG
12.0
nm
TRIP
76.8
nm
WP
ABC
SPD
16.8
kt
1nm 1nm
BRG
248
°
CSE
323
°
N
W E
Waypoint
Range to
waypoint
Depth
Speed
Trip
distance
Temperature
XTE
scale
Bearing to waypoint
Bearing
Course
Course
indicator
0
20
40
60
80
Figure 1-14a Graphic display 1
Figure 1-14b Graphic display 2
Resetting trip distance on graphic displays
The trip distance indication displays the dis-
tance the boat has traveled. To reset the indi-
cation to zero, press t or s until the
indication reads zero.